The 801 Series Mighty Mouse is ideal for use in high-density packaging applications where traditional military circular connectors are too large or too heavy. The double-start threads provide full mating in 1½ turns, and the plug features an anti-decoupling spring for vibration resistance. The unique integral molding/band platform allows direct shield attachment and cable overmolding. Receptacles are available with printed circuit board contacts. Plugs have anti-decoupling wave spring, or specify ratchet mechanism for added security.
801-007Plug with Crimp Contacts
Connectors are supplied with rear release crimp contacts. Features integral band platform, for cable shield termination and integral boot groove or select accessory threads for attachment of backshell or strain relief. Self locking anti-decoupling mechanism to prevent loosening under high vibration.
801-114Panel Mount Plug with Crimp Contacts, PC Tail or Solder Cup
Panel mount plug connector with rear release crimp contacts or select non-removable PC tail or solder cup contacts for PCB Applications backpotted and parylene compatible. Both connectors incorporate self locking anti-decoupling mechanism to prevent loosening under high vibration.
801-069-26Right Angle, Low-Profile Cobra™ Plug
Connectors feature an integrated backshell equipped with a removable rear cover and gasket providing an easy path to installing the supplied rear release crimp contacts. Ultra low profile design reduces hooking and snagging of cables. Self locking anti-decoupling mechanism to prevent demating under shock and vibration.
801-010Receptacle with Rear Release Crimp Contacts
Connectors are supplied with rear release crimp contacts. Features integral band platform for cable shield termination and integral boot groove or select accessory threads for attachment of backshell or strain relief. Contacts are packaged with the connector. Jam-nut, square flange, and in-line versions available.
801-011Receptacle with PC Tails or Solder Cup Contacts
These panel mount connectors offer PC Tails for attachment to flexible ribbon or rigid board. Select solder cup contacts for direct wire connection. Connectors are potted with epoxy for general purpose applications, or choose silicone-sealed, leak-tested versions for 1 meter water immersion. Parylene compatible.
801-052PCB Receptacle with PC Tails and Ground Pins
Features gold plated copper alloy non-removable PC tail contacts. Ground pins to provide a direct grounding path from the connector shell to the PCB board. Integral .040 (1.04) standoff for board washout. Aluminum alloy shells are backpotted and parylene compatible.
801-075Jam-Nut, Rear Panel Mount, PCB Receptacle
Features gold plated copper alloy non-removable PC tail contacts. Integral threaded .025 (.64) standoff for board washout. Choice of stainless steel or aluminum alloy shells. Backpotted and parylene compatible.
801-123Receptacle with Size #12 Twinax and Combo PC Tail Arrangements
PCB board level connectors are available in four mounting styles including, Square Flange with thru-holes, square flange with clinch nuts, square flange with locking clinch nuts, and jam-nut. Offered with 16 insert arrangements with pin or socket PC tail contacts.
801-023Right Angle Jam-Nut Rear Panel Mount, PCB Receptacle
Supplied with factory-installed, non-removable, epoxy-sealed PC tail contacts. Stainless steel threaded inserts for rigid boards attachment.
801-140CODE RED Lightweight Hermetic Receptacle, Solder Cup or PC Tail
Series 801 Lightweight Hermetic Receptacles
Feature an advanced hermetic encapsulant seal for a leak rate performance of 1 x 10-7 ccHe/second. Encapsulant seal allows for the use of copper alloy/gold plated contacts for improved performance over nickel-iron contacts typically found in glass-to-metal sealed connectors. Modified double-start stub ACME mating thread for improved protection against cross-mating and thread damage. Three shell styles — square flange, jam nut and weld mount, available. Solder cup or PC tail contacts for attachment to flex or rigid circuit boards.
801-105 and 801-106Hermetic Solder Cup Receptacles with Integrated Accessory Threads or Banding Porch
Feature a double-start modified stub ACME mating thread for improved protection against cross-mating and thread damage. Stainless steel shells suitable for E-Beam welding. 100% tested to meet 1 x 10-7 ccHe/sec @ 1 atm helium leak rate. Four shell styles available including solder mount, weld mount, jam-nut, or square flange. Solder cup contacts for easy attachment of wires ideal for wire to board applications. Contacts are gold plated, nickel-iron.
- 801-105
Hermetic Receptacles with Accessory Threads - 801-106
Hermetic Receptacles with Band Platform
801-012Hermetic Receptacles, Solder Cup or PC Tail
Features a double-start modified stub ACME mating thread for improved protection against cross-mating and thread damage. 304L stainless steel shells suitable for E-Beam welding. 100% tested to meet 1 x 10-7 ccHe/sec @ 1 atm helium leak rate. Four shell styles available including solder mount, weld mount, jam-nut, or square flange. Integral standoffs for solder washout. Solder cup or PC tail contacts for attachment to flex or rigid circuit boards. Contacts are gold plated, nickel-iron.
- Shell Style -07
Jam-Nut Mount Receptacle - Shell Style -02
Front or Rear, Square Flange Mount - Shell Style -03
Solder Mount Receptacle - Shell Style -13
Weld Mount Receptacle
801-124Hermetic PCB Receptacle with Coax Contacts
Stainless steel shell hermetic glass-sealed connectors offer excellent corrosion protection and are 100% tested to 1 x 10-7 cc/sec helium leak rate. Available with size 16 and 12 Coax contacts. Choose jam-nut, square flange, or solder mount shell styles with Integral .025 (.64) standoff for solder washout. Contacts are gold plated nickel alloy.
801-059Hermetic Receptacle with Coax Pin Contacts and Crimp Cable Adapter
Connector comes with cable adapters for termination of cable. Stainless steel, glass-sealed connectors with size 16 (up to 700 MHz) and size 12 (up to 3 GHz) coax contacts. Jam-nut, square flange or solder mount shell styles with solder washout standoffs. Contacts are gold plated nickel alloy. 100% tested to 1 x 10-7 cc/second helium leak rate.
801-125Hermetic PC Tail Receptacle with Power / Signal Contacts
Corrosion resistant stainless steel, glass-sealed connectors. Shell styles include jam-nut and square flange mount. Threaded mounting holes for high vibration and shock environments. Contacts are gold plated nickel alloy. 100% tested to 1 x 10-7 cc/second helium leak rate.
801-126Hermetic PC Tail Receptacle with Size 12 and 16 Coax Contacts
Corrosion resistant stainless steel, glass-sealed connectors. Shell styles include jam-nut and square flange mount. Threaded mounting holes for high vibration and shock environments. Contacts are gold plated nickel alloy. 100% tested to 1 x 10-7 cc/second helium leak rate.
801-074Environmental Jam-Nut Bulkhead Feed-Thru
Series 801 Bulkhead Feed-Thru provides an environmental separable connection on both sides of a mounting panel. Available in shell sizes 5 to 21 and mates with all high density plug connectors with the same polarization and opposite contact genders. Copper alloy gold-plated contacts, pin to pin, pin to socket, or socket to socket. Your choice of standard aluminum alloy or stainless steel and seven standard finishes. Please contact the factory for other materials and finishes.
801-121Hermetic Bulkhead Feed-thru Connector
Jam-Nut mount feedthrus provide a hermetic connection on both sides of a mounting panel. Stainless steel, glass-sealed connectors. Choose jam-nut, square flange or solder mount versions. Contacts are gold plated nickel alloy. 100% tested to 1 x 10-7 cc/second helium leak rate.
801-017Series 801 Sav-Con® Connector Savers
Protect expensive test equipment and cables with Glenair Sav-Con® connector savers. These plug/receptacle adapters feature non-removable contacts and anti-decoupling mechanism to prevent loosening under vibration.
Series 801 Cordsets
Choose overmolded or overbraided cordsets for your specific application. Overmolded sets are low smoke and offer excellent all-weather cable protection; overbraided sets are ultraflexible and available with Nomex®, Halar®, or PTFE-coated fiberglass.
- Series 801 Harsh Environment Shielded Cordsets
- Series 801 Ultraflexible Phantom Cable Cordsets